HOME

PRODUCT  INFORMATION

SUMMARY OF ALL METERS

Ligno-VersaTec: a multitask Meter  

The Ligno-VersaTec incorporates the most advanced microprocessor technology from Lignomat. To inspect, detect, measure, evaluate and monitor moisture in wood, concrete, sheetrock and other building materials. 

The Ligno-VersaTec is loaded with features to make your job easier: pin mode, scan mode with selectable measuring depths, special calibrations for concrete and sheetrock plus RH mode.  For more info see Specifications and Description below.

For other building materials a  reference scale for pin and pinless mode is provided 

For RH mode only: Ligno-DuoTec B 
For SCAN mode only: Ligno Scanner SD
 For PIN mode only: Lignometer K

Description

    Item

Ligno-VersaTec, Electrode E12 and BNC Cable in Case 

V-2C

Ligno-VersaTec, E12 Slide Hammer, RH BluePeg, 10 RH-S, Cables and RH Adaptor in Case 

V2-1KC

Ligno-VersTec, E14C Hand Probe, RH BluePeg, 10 RH-S, 

RH Adapter and Cables in Case  

V4-1KC

Specifications  VP-4: Ligno-VersaTec, E12, RH BluePeg, 10 RH-S, cables, case

PROPERTIES:

PIN METERS

PINLESS METERS

Measuring Range:

5-99% dependent upon species setting*

5-60% dependent upon species setting*

Resolution:

0.1% for entire measuring range

0.1% for entire measuring range

Measuring Depth:

Up to 2" with E12. Up to 7" with E16.

1/4 or 3/4" deep  (7mm and 20 mm)

 Wood Species Corrections:

over 125 individualized settings

over 125 individualized settings

 Wood Temperature Corrections:

Ligno-DuoTec F: 00F to 2100F 

Ligno-DuoTec C: -150C to 950C 

not necessary

Reference Scale:

0-99 for non-wood building materials

0-99 for non-wood building materials

Battery:

one 9V battery

Size:

2.5"x 4.75"x1" (60x120x25mm) 

Weight :

8 ounces (200g)

Electrodes:

Electrode or PK Probe required >> click here for a choice of attachments

no attachments available

Calibration Check:

The calibration is internally checked before each reading for pin and pinless mode, 

and automatically adjusted if necessary.

PROPERTIES: RH Mode

 

Using RH probes in concrete is the ASTM approved method to test concrete before installing any type of floorcovering. Lignomat's RH BluePeg is totally inside the sleeve, and therefore can be left until the test is finished, removed and reused.                   RH Range: 0-99%,  Temp: 0 to 200 degrees F or -15 to 95 degrees C.              

The Package V-2 consists of the Ligno-VersaTec, Electrode E12, BNC Cable and the Case M.

The Ligno-VersaTec was designed for versatility,  reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage.

One meter for all your moisture meter needs: 

Fast scanning of wood and all flat surfaces of non-wood materials. Detection of different moisture levels in wood, drywall, concrete, etc.

Detailed depth measurements up to 7" deep, where ever the probe can reach. Works in wood for core readings. Works in all non-wood materials to indicate where excess moisture is hiding.

RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hone in the testing area.

Operation is that easy! Without studying pages and pages of operation manuals: Depress SET Button to check settings. Use up or down buttons to correct settings. Depress % Button for moisture readings. Instrument turns itself off automatically. At any time you can change from pin mode to scan mode by depressing up or down button.

Professional Packages and In-Kiln Monitors are available for the Ligno-VersaTec please contact Customer Service for detailed quotes.

We use our experience and expertise to manufacture moisture meters 

that are consistently reliable and accurate.

 

RH BluePeg

The RH BluePeg is a sensor for relative humidity and temperature. Readings can be obtained wirebound with the Ligno-VersaTec.

The RH BluePeg conforms to the ASTM F2170 standard test method for determining the RH in concrete floor slabs.

RH BluePeg 

RH BluePeg 5 pack

RH Cable for Lignomat Meter

RH Sleeves 20 Pack      

 

Depth

Electrode

E12

The Electrode E12 can be used for wood or soft building materials (drywall, plaster...) to a maximum measuring depth of 2" (50mm). For up to 7" (17.5cm) measuring depth see >>Electrode E16>>

The slide hammer is moved up and down to drive the pins in and out of the wood. Teflon-insulated pins measure only between the tips and give core readings even if the surface is wet. The professional tool to obtain true core readings. Ideal for checking sub floors without removing floor boards or measuring fiber boards through stucco or testing structural lumber.   

Pins for E12

Teflon-insulated pins for Electrode E12 only:

#DZ: Measuring depth 1" (25mm), total length 1 5/8" (42mm)  

#DA: Measuring depth 1.5" (37mm), total length 1 5/8" (53mm)  

#DB: Measuring depth 2" (50mm), total length 2 5/8" (68mm)  

Cable for E12

The BNC Cable connects the Electrode E12 to the  

Ligno-DuoTec F or C. The cable has BNC connectors on  both ends.

Standard cable length is 3 ft (1m), available also 6ft (2m).

#BNC Cable (3ft)

E-14C

-for soft building materials such as drywall, plaster, etc.

-for hard building materials such as concrete, masonry, brick, tile

Puch into soft building materials by hand, or tab on top of electrode to insert pins. Cable is attached to electrode. Weight is 8 ozs, length without pins is 3"

Electrode E14C plus Teflon insulated pins: 1 pair EG 

Case

The black hardshell case has a double wall for sturdiness and a

foam insert for protection:

For Ligno-DuoTec K or C, Electrode E12 and BNC Cable.

(Scanner, Thermo-Hygrometer and/or Electrodes E16 can be added and fit into case M.)

Case #M: Size 13"x10"x4" (33x25x10cm)

.

.

.

.

.