|
|
||
.
Drive-in Electrode E10
Given length of pins and probes listed below is actual measuring depth, not overall length.
|
 |
|||
|
The Electrode E10 can be used for wood up to a measuring depth of 5/8" (15mm). For predrilled holes or hard to reach places teflonized pins with a maximum length of 7" (175mm) are available.Measurements of soft wood can be taken by grasping the handle and pushing the pins into the wood by hand. Hammering on top of the handle drives pins into hard wood. The handle is built out of high-impact plastic and does not break. The elongated base serves as lever to pull the pins out of the wood. Pre-drilled holes are recommended for the EL 7" (175mm) long pins. Electrode E10, including 1 pair EA, EB and EC pins weight 6ocs (200g), length w/o pins 6" (15cm) |
||||
|
 |
|||
|
Lignomat offers 4 different sizes of pins: #EA: Measuring depth 7/16" (10mm), diameter 1/16" (1.5mm) #EB: Measuring depth 7/16" (10mm), diameter 1/8" (3mm) #EC: Measuring depth 5/8" (15mm), dia. 1/8" (3mm) For veneer or delicate, small pieces: #EV: Measuring depth 3/16" (4mm), diameter 1/16" (0.8mm) Lignomat offers one pair of insulated pins: #EL: Measuring depth 7" (17cm), diameter 1/8" (3mm) |
||||
|
BNC-mini Cable |
|
The BNC-mini Cable connects the Electrode E12 to the mini-Ligno DX/C, S/DC, C and E/C. The split ends fit the meter, the BNC connector fits the Electrode E10 and/or E12. Standard cable length is 3 ft (1m), optional 6ft (2m). #BNC-mini Cable (3ft) |
||
|
BNC Cable |
|
The BNC Cable connects the Electrode E12 and/or E10 to the Lignometer, Lignomaster and Ligno-VersaTec meters. Standard cable length is 3 ft (1m), optional 6ft (2m). #BNC Cable (3ft) |
||
|
Case |
 |
The black hardshell case has a double wall for sturdiness and a foam insert for protection: For moisture meter, Electrode E10, cable and pins. Ligno-Scanner D, Thermo-Hygrometer TH and Electrode E16 with cable will also fit into the Case M. Case #M: Size 13"x10"x4" (33x25x10cm) |
||
|
. |
. |
. |
. |
. |
