Specialty
Electrode
E16
The Electrode E16 can be used for measuring moisture in wood and wood-based products as well as non-wood building materials such as
drywall, plaster, concrete brick...Pins with a measuring depth of 5/8" (15mm) are standard. Extra long, teflon-insulated pins #EL with a maximum measuring depth of up to 7" (17.5cm) are available but need to be ordered separately.
Tapping on top of electrode will insert pins. Pre-drilled holes may be required.
|
|
Electrode E16, including 1 pair EC pins
weight 8ocs (250g), length w/o pins 3" (8cm)
|
Pins |
Non-insulated pins:
#EC: Measuring depth 5/8" (15mm), diameter 1/8" (3mm)
Teflon-insulated pins:
#EL: Measuring depth 7" (17cm), diameter 1/8" (3mm)
E16-mini
Cable
The E16-mini Cable connects the Electrode E16 to the
mini-Ligno C-Models. The 5/64" (2mm) plugs fit the meter, the 5/32" (4mm) plugs fit into the two holes of the E16 Electrode shaft. Standard cable length is 3 ft (1m), optional 6ft (2m).
#BNC-mini Cable (3ft)
E16
Cable
The E16 Cable connects the Electrode E16 to the Lignometer, Lignomaster and Ligno-VersaTec meters. The 5/32" (4mm) plugs fit into the two holes of the E16 Electrode shaft.
Standard cable length is 3 ft (1m), optional 6ft (2m).
#BNC Cable (3ft)
Case
The black hardshell case has a double wall for sturdiness and a
foam insert for protection:
For moisture meter, Electrode E16, cable and pins.
Ligno-Scanner D, Thermo-Hygrometer TH and Electrode E12 with cable will also fit into the Case M.
Case #M: Size 13"x10"x4" (33x25x10cm)
.
.
.
.
.
