From Lignomat: mini-Ligno E/D (2 pages)

HOME	PRODUCT INFORMATION	SUMMARY OF ALL METERS

Pinless Ligno-Scanners

All Ligno-Scanners are calibrated to give true wood moisture readings in percent and have built-in corrections for different species.

With a pinless meter you can quickly scan a large number of boards, detect higher moisture levels and water pockets. Pinless meters are essential when checking finished products such as cabinet doors, table tops and ready-to-sell furniture, where pins would leave visible marks. Ideal for building inspectors to assess moisture conditions and water damage in buildings, especially since Scanners can also be used for non-wood building materials such as drywall, concrete, tile, etc.

New Ligno-Scanner SDM offers dual depth

and calibrations for wood, bamboo, concrete, etc..

Description	Item
Ligno-Scanner S, 1/4" deep	S
Ligno-Scanner D, 3/4" deep	D
Ligno-Scanner SD, 1/4" and 3/4" deep	SD
new: Ligno-Scanner SDM, 1/4" and 3/4" deep	SDM


	RH METERS, PIN AND SCAN

	NEW LIGNO-SCANNER SDM

	PIN METERS
	.
	mini-Ligno DX/C
	.
	mini-Ligno DX
	.
	mini-Ligno
	.
	mini-Ligno C
	.
	mini-Ligno E/C
	.
	ACCESSORIES
	.
	.
	Electrodes, Cables,
	Pins, In-Kiln Probes
	.

	.
	THERMO-HYGROMETERS
	.
	.
	Product Information
	Summary all Meters
	Home

The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth. The entire measuring pad has to be on a flat and smooth surface for accurate readings					The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
.	Measuring Depth	Corrections for Species	Range of Specific Gravity	Size of Measuring Pad
Ligno-Scanner S Ligno-Scanner D Ligno-Scanner SD	¹/4" ³/4" ¹/4", ³/4"	71 Settings 71 Settings 71 Settings	0.3 - 1.0 0.3 - 1.0 0.3 - 1.0	1 ⁵/8"x 2 ⁵/8" 1 ⁵/8"x 2 ⁵/8" 1 ⁵/8"x 2 ⁵/8"
Ligno-VersaTec	¹/4", ³/4"	71 Settings	0.3 - 1.0	1 ⁵/8"x 2 ⁵/8"
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm3)set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings. All Ligno-Scanners and the Ligno-VersaTec come with a reference scale for non-wood building materials. Measuring range: 5-99% dependent upon Species. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%. Wood temperature correction is not necessary. 1 9-V Battery for 3000 Readings, Battery included Size: 1/2"H x 2"L x 5"W (for Scanner LD width is 2 ⁷/8") Weight: 8 ozs Comes in a Carry Pouch with Belt Loop.					We suggest buying a pin meter first for its greater versatility and accuracy. As a second meter we suggest a pinless meter.