mini-Ligno S/DC with Electrode E16: Contractor Package S-6C

Early detection is a first step to prevention.

For inspectors, contractors and hardwood floor installers the S/DC with Electrode E16 can check wood and evaluate moisture distribution in concrete and other non-wood building materials. Add EL pins to go through insulation or roofing materials.

The teflonized  pins EL measure only at the tip up to 7" deep.

One step up from the Package S-6C: 

>> Professional Package with S/DC 

>> Professional Package with DX/C

 

 Description        

   Item

 mini-Ligno S/DC, with built-in pins and connector

SD-1

 mini-Ligno S/DC, Electrode E16, E16-mini Cable

SD-6

 mini S/DC, Electrode E16, E16-mini Cable, Pouch

S-6P

 1 pair EL pins, teflonized, measuring depth up to 7"       

EL

Specifications and Description: mini-Ligno S/DC, E16, Cable, Case

.

Measuring Range:

6-45%

Resolution:

0.1% for values below 10% and 1% steps above 10%

Species Corrections:

2 settings for wood species corrections with LED indicator

Reference Scale:

0-99 for non-wood building materials

Calibration Check:

The calibration is internally checked and automatically adjusted if necessary

Pins:

2 pair of pins, measuring depth of 3/16" and 7/16" (5,10mm)

Size :

pocket-size  2 3/4"x 5"x1" (70x140x25mm)

Weight:

8 ounces (200g), made out of high-impact plastic

Accessories:

wrist strap and pouch, one 9V battery and 2 pair of pins

..

Package S-6C consists of the mini-Ligno S/DC, the Electrode E16 , 

1 pair of pins EC, the E16-mini Cable and the Case S.

 The mini-Ligno S/DC has the following features:

-- a unique shape that fits comfortably in your hand when measuring

-- a measuring range low enough to check hardwood floors (6%)

-- a measuring range high enough to evaluate wet lumber (45)

-- a bright, digital display readable even in dark crawl spaces

-- resolution of  0.1% below the critical range of 10%

-- 2 settings for wood species corrections 

-- a reference scale 0-99 for non-wood building materials such as  

drywall, plaster and other "soft" building materials. 

For instance, to pinpoint problems around windows or showers,

in leaky ceilings, after water lines broke or buildings were flooded.

-- connection for external cables and electrodes - to evaluate concrete or 

reach hidden areas for moisture testing, even behind 7" of insulation.

For more options see >> Packages with mini-Lignos.

The functionally designed mini-Ligno S/DC fits in your hand when measuring and is small enough to carry in a shirt-pocket. 

The green cap covers the pins during transportation and serves as a handle when pushing the pins into the wood. This unique design allows pushing behind the entire meter to insert the tapered pins easily. Longer pins are stored inside the meter for measuring thicker material. The short pins are ideal for surface or end cut readings and for veneer.

 For measurements, push the pins into wood. The unique on-off switch between the pins, turns meter on automatically and bright LED lights instantly indicate moisture percentage.

An easy-to-use, reliable instrument.

Pins for mini-Lignos :  

#MA Pins for a measuring depth of  3/16"

#MB Pins for a measuring depth of  7/16"

We use our experience and expertise to manufacture moisture meters 

that are consistently reliable and accurate.

Over 220,000 mini-Lignos sold worldwide.

Specialty

Electrode

E16

The Electrode E16 can be used for soft and hard building materials (drywall, plaster, concrete, brick...). 

Pins for a  measuring depth of  5/8" (15mm) are included with purchase of the Electrode E16. Tapping on top of electrodes will insert pins. Pre-drilling holes may be required. 

For a measuring depth of up to 7" (17.5cm) order EL Pins separately. 

Electrode E16 including 1 pair #EC pins: 

weight 8ozs (250g), length w/o pins 3" (8cm)  

 

Pins

Non-insulated pins:

#EC: Measuring depth 5/8" (15mm), diameter 1/8" (3mm)

Teflon-insulated pins:

#EL: Measuring depth 7" (17cm), diameter 1/8" (3mm)

Helpful for depth measurement behind walls, through insulation, under roofs, or for measuring through different layers of material.

(EL pins are not included in Professional Packages.)

Cable

The E16-mini Cable connects the Electrode E16 to the  

mini-Ligno DX/C. The cable has 2mm plugs on one 

end and 4 mm plugs on the other end.

Standard cable length is 3 ft (1m), available also 6ft (2m).

#E16-mini Cable (3ft)

Case

The black hardshell case has a double wall for sturdiness and a

foam insert for protection. For mini-Ligno DX/C,  Electrode E16 and E16-mini Cable, 1 pair EC pins. 

 

Case #M: Size 10"x7.5"x4" (25x20x10cm) 

.

.

.

.

.