HOME

PRODUCT  INFORMATION

SUMMARY OF ALL METERS

Ligno-Tec RH: a meter for concrete  

The Ligno-Tec RH is a meter designed for contractors, floor covering installers and restoration to be used in connection with the RH BluePeg Sensor for in-depth moisture measurement in concrete

Concrete in RH Mode:

The meter has a connection built-in for the RH BluePeg sensor to take in-depth moisture measurements that conform to ASTM F 2170

Other Options for meters are:

For a meter that does it all: Ligno-VersaTec

For a scan meter, that does RH: Ligno-DuoTec BW

For a basic pin meter: mini-Ligno S/D

 

Description

    Item

 Ligno-Tec RH meter only 

T    

   Ligno-Tec RH, 1 RH BluePeg Sensor, 1 Adaptor (Thermo-Hygrometer)

T-1B

RH Package: Ligno-Tec RH meter

.
   1 RH Sensor, RH Cable, RH Adaptor, 10 Sleeves in pouch T-1KP

.

  RH BLUEPEG METERS

  Ligno-DuoTec B

Ligno-DuoTec BW           

.

Ligno-VersaTec

              

RH BluePeg 
Pro Packages 

.

ACCESSORIES

RH BluePeg

.

 Thermo-Hygrometers

.

.

.

.

  Product Information 

.

Summary all Meters

.

.

Home

.

 

Specifications  Ligno-Tec RH 

PROPERTIES:

BUILDING MATERIALS IN SCAN MODE

Resolution:

0.1% for entire measuring range

Measuring Depth:

1/4 or 3/4" deep  (7mm and 20 mm)

Reference Scale:

0-99 for non-wood building materials, 0-99 for concrete, 0.4-2.0 for gypsum

Battery:

one 9V battery

Size:

2.5"x 4.75"x1" (60x120x25mm) 

Weight :

8 ounces (200g)

RH BluePeg:

 RH BluePeg probe required for relative humidity testing in concrete

Calibration Check:

The calibration is internally checked before each reading for pin and pinless mode, 

and automatically adjusted if necessary.

PROPERTIES: RH Mode

 

Using RH probes in concrete is the ASTM approved method to test concrete before installing any type of floorcovering. Lignomat's RH BluePeg is totally inside the sleeve, and therefore can be left until the test is finished, removed and reused.                   RH Range: 0-99%,  Temp: 0 to 200 degrees F or -15 to 95 degrees C.              

The Package B-RH consists of the LignoDuoTec B, RH BluePeg, RH cable, 10 RH Sleeves and caps and the Case M.

The Ligno-DuoTec was designed for reliability and accuracy as well as sturdiness and ease of operation. The instruments have proven to perform well in rough mill environments with day-to-day usage.

Fast scanning of all flat surfaces of non-wood materials. Detection of different moisture levels in drywall, concrete, etc.

RH BluePeg can be used as a measuring device for ambient relative humidity and temperature or placed in a measuring sleeve, which can be inserted into a predrilled hone in the testing area.

Operation is that easy! Without studying pages and pages of operation manuals: Depress SET Button to check settings. Use up or down buttons to correct settings. Depress % Button for moisture readings. Instrument turns itself off automatically. At any time you can change from pin mode to scan mode by depressing up or down button.

 Ligno-DuoTec please contact Customer Service for detailed quotes.

We use our experience and expertise to manufacture moisture meters 

that are consistently reliable and accurate.

RH BluePeg

The RH BluePeg is a sensor for relative humidity and temperature. Readings can be obtained wirebound with the Ligno-VersaTec.

The RH BluePeg conforms to the ASTM F2170 standard test method for determining the RH in concrete floor slabs.

RH BluePeg 

RH BluePeg 5 pack

RH Cable for Lignomat Meter

RH Sleeves 20 Pack    

Case

The black hardshell case has a double wall for sturdiness and a

foam insert for protection:

For Ligno-DuoTec K or C, Electrode E12 and BNC Cable.

(Scanner, Thermo-Hygrometer and/or Electrodes E16 can be added and fit into case M.)

Case #M: Size 13"x10"x4" (33x25x10cm) 

.

.

.

.

.